Oxide Paint – Grey, Black, Red, Green

Product Description

OXIDE PAINT is single component, low build solvent based general purpose oxide primer. It is an economical oxide primer for general industrial steel structure work which required fast handling time, it also has good hiding power and good build to give easy painting task, good coverage and semi gloss finishing to painted surfaces. A suitable top-coat should be painted over the primer as to protect it from UV deterioration and to enhance its protection property

Uses: As a primer in a multi-coat coating system. Intended for inland, general industrial environment and most suitable for use on steel, GI and other metal surfaces, where general corrosion protection is required

Previous painted surface and bare substrate must be completely dry and free from rust, mill-scale, dirt, grease and other contaminants before painting. For maximum adhesion and durability of paint performance, all bare surfaces should be prepared by meant of sand paper, hand tools, power tools and etc

Frequently Purchase Together

STANLEY Power Winder Fibreglass Long Tape

Folding Tru-Zero end hook for accurate inside and outside measurements.
Rewinds 3x faster with 3:1 gear ratio.
2 sided blade graphics with fractional decimal / insh foot scales.
Reinforced blade end for long life.
End loop for easy pulling & achoring.
Slip-resistant cushion grip handle.
Blade bumper to help prevent blade damage.
Comfortable contoured handle.
Durable and impact resistant construction for life.

Galvanized Link Chain

Rust-resistant.
Material : Steel coated with zinc.
Strong and durable, can handle heavy loads and tension
Use for construction, securing heavy objects, or as part of lifting and rigging systems.
Weight : 27 kg
Grade : G30

Safety Shoe

Brand: PICASAF
Material: PU Leather, Metal Toe Cap, Metal Midsole.
Provide protection against heavy impacts and punctures.
Keep feet safe from sharp objects.
Use Range: construction sites, mining areas, workshops

3 Pin 16Amp 220v Industrial Male Plug

Type: Male Plug
Current(A) : 16A
Voltage(V) : 220V-250V
Protection Degree : IP44
Industry Used

SOBAR Flap Disc

MPA Certified
Diameter: 4.5" (115mm)
Suitable for: Stainless Steel, Carbon Steel, and Non-ferrous Metals
Design for aggressive material removal and smooth blending of surfaces
Ideal for grinding, deburring, and finishing in metal fabrication and welding
Constructed to reduce vibration and minimize the risk of wheel failure
Provides fast stock removal with minimal heat buildup to prevent material damage

BOSCH GWS20-180 Angle Grinder

Rated power input: 2000 W
No-load speed: 8,500 rpm
Grinding spindle thread: M14
Disc diameter: 180 mm
Voltage: 240 V
Frequency: 50 / 60 Hz
Weight: 4.2 kg (without cables and accessories)

Need Assistance?

Drop Your Enquiry Here for Expert Guidance!

Enquiry Form