WD-40 Fast Drying Contact Cleaner

WD-40 Fast Drying Contact Cleaner

  • Dielectric strength up to 35,000 Volts per 0.1 inch
  • Fast acting, non-conductive cleaner
  • Penetrates quickly, fast drying and leaves no residue
  • RoHS compliance
  • Perfect for cleaning electrical equipment, contacts and plastics

Product Description


 
APPLICATION
Circuit Boards / Controls / Electrical Assemblies / Printers and Copiers / Switches / Tape Heads and Precision Instruments
*It is advisable to test on a sample before use. For all precision instruments, check with manufacturer. Prolonged exposure for rubber not recommended.
 
DIRECTIONS
  • Isolate all electricity and allow hot surfaces to cool. Make sure all stored power is drained from the system. Shake can well before use
  • Hold can 15cm to 20cm away from the surface and spray directly onto the electronic device or circuit board to eliminate and remove contaminants that may cause loss of electrical contact
  • Tilt surface while cleaning and allow any excess cleaner to run off
  • Allow product to dry completely and thoroughly vent the system before restoring power

Frequently Purchase Together

Earplug
  • DOSH SIRIM Approved
  • Made with soft foam
  • Reduces noise levels up to 35 dB
  • Function: For noise blocking
Webbing Sling Belt 3 ton x 10 mtr
  • Loading Surface Is Wide
  • Reduce Weight At Each Loading Point
  • Various Loading Method
  • High Strength / Weight Ratio
  • Anti Abrasion And Anti Incision Protection Sleeve Can Be Attached
  • Special Label Working Load According International Standard
  • Non Conductive No Danger Of Electric Shock
  • Safety factor = 6:1
  • 100% POLYESTER
  • SIZE LENGHT : 10 M
WD-40 Multi Purpose Lubricant 333ml
  • Protects Metal from Rust and Corrosion
  • Penetrates Stuck Parts
  • Displaces Moisture
  • Clean Grease, Grime and Gunk
  • Dissolves and Removes Adhesives and Sticky Residues
  • Lubricates Just About Anything
Metal Tool Box
  • Material : Steel 
  • Function : Protects tools from damage, dust, and moisture. 
  • Color : Blue 
Cable Tie
  • Heavy Duty
  • For Home Office Garage and Workshop
  • After opening the package, please store the untapped cable ties sealed, if exposed to the outside, will lead to water loss, and will be easy to break
  • djustable, reusable and durable; Recommend using temperature: 5 to 60℃
  • Cable ties contain water in its chemical composition, would fracture a little when meeting low temperature, and they will work normally in ambient temperature
  • Stable quality and low insertion
PICASAFE Batik Knitted Glove
  • Heavy duty gloves with batik design
  • Ideal for protect fingers, palm and hand
  • Suitable use for automobile industry, construction, machinery industry and etc
  • Made out of soft and elastic material
  • Breathable
  • Easy and convenient to wear
Need Assistance?
Drop Your Enquiry Here for Expert Guidance!
 
Enquiry Form