HERO TECH Inventer Plasma Cutting Machine CUT-70

HERO TECH Inventer Plasma Cutting Machine CUT-70

  • Increased cutting capacity, cutting speed increased 1.8 times.
  • Effective and economical cutting capacity both in speed and thickness.
  • Able to cut stainless steel, carbon steel, alloy steel, copper, and aluminium.
  • Users low-cost compressed air.
  • Come with accessories : 
    • JW-72 Plasma Cutting Torch Complete Set
    • Eart Clamp with cable and fitting
    • JW-72 Electrode Tip
    • JW-72 Cutting Tip (1.0 mm)

Product Description

 
Specification UNIT CUT-70
Input Voltage VAC 415, 3Ø, 50/60Hz
Rated Voltage % ±15
Relate Input Power KVA 11
Rated Duty Cycle % 60
Efficiency % 85
Power Factor % 93
Output Current ADC 20 - 60
Output Voltage VDC 108
Open Circuit Voltage VDC 240
Air Flow M / min 0.25
Air Pre-Flow sec 0.1
Max. Cutting Thickness mm 25
Perfect Cutting Thickness mm 12
Control - STANDARD
Arc Starting - No-contact arc starting
Insulation Class LEVEL B
IP Rating LEVEL IP23
Dimension (W*D*H) mm 650 * 330 * 430
Weight KG 24
 
 
Specification UNIT CUT-70
Input Voltage VAC 415, 3Ø, 50/60Hz
Rated Voltage % ±15
Relate Input Power KVA 11
Rated Duty Cycle % 60
Efficiency % 85
Power Factor % 93
Output Current ADC 20 - 60
Output Voltage VDC 108
Open Circuit Voltage VDC 240
Air Flow M / min 0.25
Air Pre-Flow sec 0.1
Max. Cutting Thickness mm 25
Perfect Cutting Thickness mm 12
Control - STANDARD
Arc Starting - No-contact arc starting
Insulation Class LEVEL B
IP Rating LEVEL IP23
Dimension (W*D*H) mm 650 * 330 * 430
Weight KG 24
 

Frequently Purchase Together

High Pressure High Flow Regulator (Laser Gas)
High Pressure High Flow Regulator (Laser Gas)
  • High pressure and high flow.
  • Body and housing cap are machined from class "A" brass.
  • Special for laser gas machine.
  • Sintered bronze inlet filter.
  • 2 gauges for easy reading.
  • Regulators verified by ECM, European standard EN ISO 2503:2009 and related to CE Directive 2014/68/EU (Pressure Equipment).
HERO Electrode Holder 300, 500 amp
HERO Electrode Holder 300, 500 amp
  • Made of high quality copper, the clamp has good conductivity
  • Handle with special insulation heat-resistant material, non-conductive, anti-scald, suitable for long term use
  • Comfortable to hold, safe to use
  • Ergonomic design for user's comfort
  • Current capacity: 300A/500A
Leather Legging Spats
Leather Legging Spats
  • Long: 30cm
  • Material: Leather 
  • Protects lower legs and feet from dirt, debris, heat, and minor abrasions
  • Usually used by welder, blacksmith 
  • Color: Golden Yellow
 
MB15 Gas Nozzle
MB15 Gas Nozzle
  • Made of a heat-resistant material, such as brass or copper.
  • Inner diameter : 12mm.
  • Lenght : 54mm.
  • Conical shape.
PICASAF Fire Retardant Coverall
PICASAF Fire Retardant Coverall
  • Fabric: Flame resistant.
  • Reducing the likelihood of catching fire when exposed to combustion and high temperatures.
  • Two chest pockets with flaps and Brass Buttons. Two back pockets with flaps and Brass Buttons. Pencil pocket on the front left pocket.
  • Weight : 250 grams
High Pressure Nitrogen Regulator
High Pressure Nitrogen Regulator
  • 2 gauges for easy reading.
  • Stem type seat assembly for more reliable performance.
  • Forged brass body.
  • Housing cap are machined from class "A" brass for delivery pressure450 psi.
  • Sintered bronze inlet filter.
  • Regulators verified by ECM, European standard EN ISO 2503:2009 and related to CE Directive 2014/68/EU (Pressure Equipment).
Need Assistance?
Drop Your Enquiry Here for Expert Guidance!
 
Enquiry Form